How to Flash a Samsung Galaxy Note 8 with a Full Storage Issue
Introduction
It can be perplexing when a smartphone, like the Samsung Galaxy Note 8, refuses to work due to a full storage issue. Many users might not expect that their device would shut down for this reason. However, filling the storage can result in system instability, ultimately leading to the device not booting up at all. This guide will walk you through the process of performing a full factory reset and then flashing the firmware to resolve this issue.
Understanding the Problem
When your device is too full, the system might be unable to perform necessary background processes, leading to overloading and potentially causing a system crash. A factory reset can help by clearing out unnecessary data and resetting the system to its original state, but for a more definitive solution, flashing the firmware may be necessary.
Steps to Flash a Samsung Galaxy Note 8
To proceed with the process, follow these detailed steps:
Boot to Recovery Mode
Turn off the Samsung Galaxy Note 8 completely.
While keeping the device off, press and hold the Volume Up, Bixby, and Power keys simultaneously for a few seconds, until you see the Samsung logo on the screen.
Once the logo appears, you will see a screen that says Installing System Update or No Command. Wait for a few seconds until the Blue Screen disappears.
Select Recovery Mode using the Volume Up and Volume Down keys if the option appears. If it doesn’t, you have already entered recovery mode.
Follow the prompts to perform the factory reset from within the recovery menu. This will erase all data and apps on the phone, restoring it to its factory settings.
Boot to Bootloader Mode
Turn off the Note 8 again.
Now, press and hold the Volume Down button instead of the Volume Up, alongside the Power key, for a few seconds. The screen should show the Samsung logo again.
Once the logo appears, the bootloader screen should appear. This is the mode you need to be in to flash firmware.
Connect the phone to a computer via a USB cable.
Follow the instructions provided by the manufacturer or third-party software (such as Samsung Kies or Odin) to begin the flashing process. Ensure your software is up-to-date to avoid any potential issues.
Post-Flash Procedures
After flashing the firmware, allow the phone to reboot fully. This will ensure that all new settings and security measures are applied correctly. Once the phone has rebooted, you should have access to the latest firmware, which should solve the original problem of the device refusing to switch on due to a full storage issue.
Conclusion
By following these steps, you can successfully flash a Samsung Galaxy Note 8 that refused to switch on due to a full storage issue. This process will clear out the current data and set the phone back to its factory state, ensuring optimal performance. If the issue persists, it might be worth consulting Samsung’s official support for further assistance.